WORK PLANS - Laserfiche WebLink

Home Browse Search

COMIM Project Health and Safety Plan E N 6 1 N E E R I N G Martin Metals Finishing Inc. (Former) Stockton, California • Avoid touching chemicals. If contact is unavoidable, use gloves. Wash after contact. Review Safety Data Sheets (SIDS). • All potentially hazardous conditions should be properly identified, and the hazard should be isolated or barricaded to prevent injuries. • Take extra care when working near or with heavy equipment.Always maintain awareness of your surroundings. If you are not operating equipment, then stay outside of operating radius when equipment is in use. • Coronavirus Disease (COVID-19) is an infectious respiratory disease. To minimize the spread of this disease practice social distancing, wash hands frequently and stay home if you are sick. • Use common sense and stay alert. 3 PROJECT INFORMATION CDIM has developed this HSP for work to be performed during the PEA(project)required by the CalEPA Department of Toxic Substance Control (DTSC). CDIM Engineering, Inc. prepared a Preliminary Endangerment PEA and Work Plan' on behalf of FIP to assess impacts of the historic operations at the Martin Metal Finishing Inc. (MMF)location at 1250 South Wilson Way in Stockton,California(the Site)and to identify whether remediation or mitigation is necessary to achieve Site Certification from DTSC. The Site has been occupied by industrial users since sometime prior to 1950. MMF occupied the Site from approximately 1981 to 1990 and performed metal plating and painting onsite. The operations included chemical dip tanks and rinse tanks, and wastewater pretreatment. Wastes generated by the operations included solvents and metal-laden filter cake from pretreated wastewater. In 1984, the City of Stockton (City) discovered that MMF had been illegally discharging wastewater to Mormon Slough via storm drain trenches and storm drainpipes. The storm drainpipe from the trench to the Mormon Slough outfall was replaced sometime around 1979, reportedly before MMF operations commenced. The purpose of the PEA is to address data gaps from previous Site investigations and to collect data representative of current Site conditions,the objective of which is to evaluate the ongoing impact of historical MMF activities on the Site and in Mormon Slough and any necessary remediation or mitigation to achieve Site closure certification from the DTSC. This HSP applies to CDIM and all subcontractors, including the Driller. This HSP establishes the policies and procedures to be implemented to provide a safe, healthful, and productive work environment including COVID-19 and social distancing requirements. This HSP has been prepared to meet the requirements of: • OSHA requirements outlined in the Code of Federal Regulations (CFR) Title 29, Section 1910.120; • California Code of Regulations (CCR), Title 8, Section 5192; and • Other State and Local Health Orders. ' CDIM, 2022. Preliminary Endangerment Assessment Work Plan, Martin Metals Finishing Inc(Former), Stockton, California. September 21. CDIM—Fairgrounds Industrial Park Page 2