WORK PLANS - Laserfiche WebLink

Home Browse Search

Project Health and Safety Plan E N 6 1 N a E R I N C. Martin Metals Finishing Inc. (Former) Stockton, California completed, as appropriate. Field activities will generate disposable PPE. Waste materials will be disposed in accordance with applicable laws and regulations. 6.7 Medical Surveillance Contractors and subcontractors who may wear respirators have received medical screening per the requirements of Title 29 CFR § 1910.134(k)and § 1926.103(c)(1), as well as Title 8 CCR§ 5144. Respirator use is not anticipated for this project. The CDIM project manager for each CDIM team member will maintain copies of the physician's statement of the employee's fitness for duty, the employee's ability to wear a respirator, and whether there are any work restrictions. Written copies of this information will be made available to the CDIM team lead within 48 hours upon request. 6.8 Safety Meetings Safety meetings, also called "tailgate meetings" will be held to ensure that all field personnel and visitors are aware of the health and safety hazards at the Site. The onsite CDIM project manager or representative will conduct a kickoff meeting prior to the initiation each Task identified in Section 3 that includes a discussion of the health and safety hazards identified in this HSP. Daily Safety Tailgate Meetings are also required at the start of each workday and will be completed in the field and documented using the form provided in Appendix C. 7 PERSONAL PROTECTIVE EQUIPMENT PPE for Site workers is selected and will be used based on existing and potential hazards encountered during the project and the requirements of Title 29 CFR§ 1910.120. The selection of PPE requires an evaluation of chemicals and their concentrations and physical hazards that may be encountered. Contractors and subcontractors will follow HSP-1, Personal Protective Equipment (Appendix B). 7.1 Required Face Coverings All employees shall wear face coverings when indoors on the Site. 7.2 PPE The following PPE are required for project work: • Hard hat; • Safety glasses; • Nitrile gloves; • Cut-resistant gloves (as needed); • Extension sampler device (as needed); • Rubber boots (as needed); and • Hearing Protection (as needed). CDIM—Fairgrounds Industrial Park Page 12