Laserfiche WebLink
as specified in the Standard Specifications, these special provisions and as directed by the <br /> Engineer, shall be considered as included in the prices paid for the various contract items of <br /> work involved and no additional compensation will be allowed. <br /> PART 2- PRODUCTS <br /> 2.01 MATERIALS <br /> the <br /> oducts <br /> All paint and coating materials furnished mate�ialsach shallobelns edstem in the hworkbeParticpurlar attention on <br /> of a <br /> single manufacturer. Only compatible <br /> shall be directed to compatibility of primers and finish coats. <br /> lied coatings,The volatile organic content (VOC) of the app s, as determined in accordance with 9 <br /> ASTM D3960, shall comply with prevailing air pollution regulations. <br /> If the specified products are not available in formulations that meet applicable regulations on <br /> VOC levels at time of application, <br /> Contractor <br /> s in effect a that timmit for eview products of equivalent <br /> quality and function that comply with eg <br /> No request for substitution of an "equal" will be considered which decreases the film thickness <br /> designated, the number of coats to be applied, solids content by volume, the general type of <br /> coating, paint, or primer, or the quantity, quality and type of ingredients in the coatings specified. <br /> Paints not listed in the specifications shall be submitted with certified ingredients analysis so <br /> that a complete comparison between specified and proposed paint may be made. <br /> 2.02 COLORS <br /> All colors and shades of colors of all <br /> t nt shall <br /> facil ate Snspectionindicated <br /> or of sulrface overageby the itof <br /> y. <br /> Each coat shall be of a slightly different shade <br /> each coat. Finish colors shall be as selected from the manufacturer's standard color samples by <br /> the City. <br /> PART 3 - EXECUTION <br /> 3.01 COATINGS <br /> A. Coating Systems - <br /> 1. Shop Applied Prime Coat <br /> Except as otherwise specified, prime coats shall be shop applied. Shop applied -- <br /> primer shall be compatible with the specific coating system and shall be applied <br /> lied <br /> at the minimum dry film thickness recommended by the manufacturer. App <br /> submittal data identifying the shop primer used shall be provided to the onsite <br /> finish coat applicator and to the Engineer before delivery of items to the jobsite. <br /> Damaged, deteriorated and poorly applied shop coatings that do not meet the <br /> requirements of this section, the field coating may consist of touching up the <br /> shop prime coat and then applying the finish coats to achieve the specified film <br /> thickness and continuity. <br /> NEI Phase II water and Sewer <br /> July 2007 <br /> Division III-105 CIP Nos. 7468,7589,7590 <br />