COMPLIANCE INFO_2016 - 2017 - Laserfiche WebLink

Home Browse Search

SEP 2 2 2016 ENVIRONMENTAL HEALTH DEPARTMENT 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑Professional Engineer ❑ Other(Spec) Test Method Used: ❑Pressure ❑Vacuum N Hydrostatic ❑Other(Spec) Test Equipment Used:Incon Sump Tester Equipment Resolution: +/-0.002" STP Sump 8 87 STP Sump tt 91 Sump Diameter: 42" 42" Sump Depth: 53" 53" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 19" 19" Hi est Piping Penetration: Height from Tank Top to Lowest 21" 16" Electrical Penetration: Condition of sump prior to testing: Good Good I Portion of Sump Tested' 2"above piping 2"above piping Does turbine shut down when sump sensor detects liquid(both ❑Yes❑No ®NA ❑Yes El No ®NA roduct and water)? E Turbine shutdown response time N/A N/A Is system programmed ffail-safe shutdown?. ❑Yes or ❑No ®NA ❑Yes❑No ®NA II Was fail-safe verified to be ❑Yes❑No ®NA ❑Yes❑No ®NA q o erationalf j Wait time between applying pressure/vacuum/water and starling 30 minutes M minutes I test: ' Test Start Time: 12:10 pm 11:36 am Initial Reading(Rt): 5.9320 4.6578 Test End Time: 12:25 pm 11:51 am i Final Reading(RF): 5.9322 4.6568 I! Test Duration: 15 min. 15 min. f Change in Reading(Rr Rl): 0.0002 0.0010 Pass/Fail Threshold or Criteria: +1-0.002" +/-0.002" E Test Result: O Pass ❑Fail El Pass ❑Fail Was sensor removed for testing? ® Yes❑No❑NA ®Yes❑No❑NA Was sensor properly replaced and ®yes❑No❑NA ®Yes❑No❑NA verified functional after testing? Comments— (include information on repairs made prior to testing and recommended follow-up for failed rests) I "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work". a 'If the entire depth of the sump isnot tested,specify how much was tested. If the answer to any of the questions indicated with an [ asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160) i s 3 l