Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 6. PIPING 5U-W TESTING <br /> Test Method Developed BY: ❑Sump Manufacturer X Industry Standard ❑Professional Engineer <br /> L Other(Specify) <br /> Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic <br /> n Other(Specify) <br /> Test Equipment Used:NOON Equipment Resolution:+4002 <br /> UST piping Sump Sump# Sump# 5ump# <br /> Sump Diameter: 42" <br /> Sump Depth: 527) <br /> Sump Material: Fiberglass <br /> Height from Tank Top to Top of 20" <br /> Hi hest Piping Penetration: <br /> Height from Tank Top to Lowest 20" <br /> Electrical Penetration_ <br /> Condition of sump prior to testing: good <br /> Portion of Sump Tested' 2"over pipe pen <br /> Does turbine shut down when <br /> sump sensor detects liquid(both Q Yes ❑No X NA ❑Yes ❑No ❑NA 0 yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> -product and water)?* <br /> Turbine shutdown response time N/A <br /> Is system programmed for fail-safe <br /> y p <br /> shutdown?' ❑Yes 11No X NA 11 Yes ❑No [1 NElEIL'A Yes No ❑NA Cl Yes No ❑NA <br /> Was fail-safe verified to be <br /> -operational?* ❑yes L-1NoNo X NA ❑Yes ❑No NA ❑Yes No ❑NA Yes No G NA <br /> Wait time between applying <br /> pressurelvacuum/water and starting 30 min <br /> test: <br /> Test Start Time: 10:52/11:08 - <br /> Initial Heading(Rj): 6.0574/6.0574 <br /> Test End Time: 11:07/11:23 <br /> Final Reading(RF): 6.0574/6.0573 <br /> Test Duration: 15 minX2 <br /> Change in Reading(RF-RI): 0.0000/0.0001 <br /> Pass/Faii Threshold or Criteria: +-0.002 <br /> Test Result: X Pass ❑Fail 0 Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail <br /> Was sensor removed for testing? X Yes ❑No ❑NA C7 Yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes E!No ❑NA <br /> Was sensor properly replaced and X yes ❑No ❑NA LJ Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> verified functional after testing? <br /> Coxnments— include information on repairs made pfior to testin , and recommended follow_I p for failed tests) <br /> 'If the entire depth of the sump is not tested, specify how much was tested. If the answer to my of the questions indicated with an <br /> asterisk M is"NO"or"NA",the entire sump must be tested, (See SWRCB LCT-160) <br />