COMPLIANCE INFO 2007-2012 - Laserfiche WebLink

Home Browse Search

Page 4 of 8 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer 0 Industry Standard ❑ Professional Engineer ❑Other(Specify) Test Method Used: ❑ Pressure ❑Vacuum ❑ Hydrostatic ❑Other(Specify) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: 0.025 Reg Sump # 1 Prem sump # 2 Diesel sump # 3 Sump # Sump Diameter: 48" 48" 48" Sump Depth: 59" 58" 59" Sump Material: FG FG FG Height from Tank Top to Top of 12" 11" 12" Highest Piping Penetration: Height from Tank Top to Lowest 19" 19" 19" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' Does turbine shut down when sump sensor detects liquid(both product and ❑ Yes ❑ No 0 NA ❑ Yes ❑ No I] NA ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA water)?' Turbine shutdown response time Is system programmed for fail-safe ❑ Yes ❑ No IM NA ❑ Yes ❑ No 0 NA ❑Yes ❑ No IS] NA ❑ Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be rQYes ❑ No IMNA ❑ Yes ❑ No ONA ❑Yes ❑ No ®NA G] Yes ❑ No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting test: Test Start Time: 11:05 11:05 11:45 Inidal Reading(Ri): 0.0025 0.0025 0.0025 Test End Time: 1:35 11:35 12:15 Final Reading(RF): 0.0025 Test Duration: '/i hr Change in Reading(RF-Ri): 0 Passl�Threshold or Criteria: 1/16" in hr 1/16" in hr 1/16" in hr Test ❑ Pass 0 Fail ❑ Pass 0 Fail E Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? 0 Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA IM Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Was sensor properly replaced after IM Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA IM Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA testing? Comments—(include information on repairs made prior to testing and recommended follow-up for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or`NA",the entire sump must be tested. (See SWRCB LG-160)