Laserfiche WebLink
SWRCB,January 2002 '% � Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Not Tested <br /> Test Method Developed By: Sump Manufacturer Industry Standard Professional Engineer <br /> Other(Spec) <br /> Test Method Used: Pressure Vacuum Hydrostatic <br /> Other(Spec) <br /> i <br /> Equipment Used: Equipment Resolution: <br /> T Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sum De the <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank flop to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sum Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> -starting test: <br /> Test Start Time: <br /> Initial Reading 114): <br /> Test End Time: <br /> Final Reading RF): <br /> Test Duration: <br /> -Change in Reading (RF—Rt): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: Pass Fail Pass Fail Pass Fail Pass Fail <br /> Is there a sensor in the sump? Yes No Yes No Yes No Yes No <br /> Does the sensor alarm when <br /> either product or water is Yes No NA Yes No NA Yes No NA Yes No NA <br /> detected? <br /> Was sensor removed for testing? Yes No NA Yes No NA Yes No NA Yes No NA <br /> Was sensor properly replaced and Yes No NA Yes No NA Yes No NA Yes No NA <br /> verified functional after testing? I j <br /> Com inents—(include information on repairs made prior to testing, and recommended follow-un mailed tests) <br />