Laserfiche WebLink
Site PARration and Installation Instruction <br /> Oil rco EMC Baric Monitoring Console <br /> 1. Use a standard 4" tank locking cap, "Evertite" or <br /> equivalent, with standard ring adaptor. <br /> 2. Drill and tap the cap fora 3/8"x 18 NPT cord grip thread <br /> (refer to Figure 14, "Probe Riser Cap Modification"). 4 •f <br /> ±.062 <br /> �� �+� + <br /> 1.438 —.375 - 18 N.P.T on <br /> ±.062 Figure 16. Magnetostrictive Probe Installation Kit <br /> 1.625 with 2" Floats. <br /> Q <br /> j <br /> Figure 14. Probe Riser Cap Modification. <br /> 3. Install a water-tight cable bushing in the 3/8"threaded <br /> hole in the top of the cap. Use an appropriate thread <br /> sealant to ensure water-tightness.Also install a water- <br /> tight cable bushing in the probe junction box in a i" <br /> similar manner. <br /> C.PROBE RISER ADAPTOR INSTALLATION. }" <br /> 1. Remove the probe from its box and place it on its side. <br /> Remove the probe riser adaptors from the Magnetostric- <br /> • CANIS f EM <br /> Live Probe Installation Kit box(see Figure 15 or 16), <br /> 2. Place one riser adaptor on top of the probe canister with <br /> its bevelled edge down and its locking tabs aligned with <br /> the flats on the canister(see Figure 17 or 18). <br /> 3. Press the adaptor onto the canister until the locking Figure 17. 4" Probe Riser Adaptor Ring Installation. <br /> tabs are on the flats. Twist the adaptor until the tabs <br /> are on the diameter of the canister and slide the <br /> adaptor to the bottom of the canister. <br /> ` 4. Once the adaptor is at the bottom of the canister,twist <br /> the adaptor until its locking tabs snap into the locking <br /> grooves. <br /> novice ecxar <br /> / �W rJ•,� 7AOAYiQN <br /> s+�w+. _ Ririli <br /> � 3 _ <br /> w �- <br /> .u.r,n <br /> ..i <br /> Figure 15. Magnetostrictive Probe Installation Kit <br /> with 4" Floats. Figure 18. 3" Probe Riser Adaptor Ring Installation <br /> 14 <br />