Laserfiche WebLink
0 i <br /> 5 Installing your pH Control <br /> 2 Installation Procedures <br /> 7 " A. Connect the "Washing Machine Hose" to the <br /> "water Inlet" of the pH Control. Then, Connect <br /> the other end of the "Washing Machine Hose" to <br /> the city water line. <br /> B. Place the yellow "Do not turn water valve off' <br /> tag on the city water line shut-off valve. <br /> • <br /> C. Place the Neutralizer Tank in the containment <br /> tray. Using 3/8" tubing, connect the Neut.tank to <br /> the "Neutralizer Tank" inlet of the pH Control. <br /> 8 <br /> Connect the four sensors to the power supply of <br /> the pH Control. <br /> • Spill sensor <br /> • • Neutralizer level sensor <br /> • Water level sensor <br /> • Dev level sensor <br /> 4W <br /> 1 Place the puck next to the drain. <br /> Slowly remove the pH probe for the reaction tank. <br /> Then carefully remove the black cap on the probe. <br /> Place the probe back into the Reaction tank. <br /> 10 1 A. Plug the pH Control into a stable power source. <br /> of" <br /> B. Turn ON the city water valve. <br /> • C. Turn ON the power switch located on the back of <br /> the pH Control's power head. If the LCD is OFF, <br /> press the 1/0 key. <br /> i ✓ 1 <br /> Page 10 Meta Pix PH Control Manual <br />