Laserfiche WebLink
SWRCB,January 2002 • Page of <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: ❑Sump Manufacturer (9 Industry Standard ❑Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: ❑Pressure D Vacuum ®Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used:WATER, INCON STS Equipment Resolution:.0001" <br /> Sump#REG STP Sump## Sump# Sump# <br /> Sump Diameter: 42" <br /> Sump Depth: 44" <br /> Sump Material: FIBER <br /> Height from Tank Top to Top of 18„ <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 14" <br /> Electrical Penetration: <br /> Condition of sump prior to testing: DRY/CLEAN <br /> Portion of Sump Tested' 22" <br /> Does turbine shut down when <br /> sump sensor detects liquid(both O Yes ❑No ❑NA ❑Yes D No ❑NA ❑Yes ENO DNA D Yes ❑No ❑NA <br /> product and water)?` <br /> Turbine shutdown response time <br /> Is system programmed for fail-safe []Yes ❑No ❑NA ❑Yes ❑No DNA ❑Yes ❑No DNA ❑Yes ❑No ❑NA <br /> shutdown?' <br /> Was fail-safe verified to be ❑Yes ❑No ❑NA D Yes ❑No DNA D Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> operational?' <br /> Wait time between applying <br /> pressure/vacuum/water and starting <br /> test: <br /> Test Start Time: 1051 <br /> Initial Reading(Ri): 5.3040 <br /> Test End Time: 1106 <br /> Final Reading(RF): 5.3042 <br /> Test Duration: 15 min <br /> Change in Reading(RF-Rr): .0002 <br /> Pass/Fail Threshold or Criteria: .002 <br /> Test Result: s Pass ❑Fail ❑ Pass Q Fail ❑ Pass ❑Fail ❑ Pass ❑Fail <br /> Was sensor removed for testing? ❑Yes D No DNA D Yes ❑No DNA D Yes ❑No ❑NA ❑Yes ❑No DNA <br /> Was sensor properly replaced and ❑Yes ❑No DNA DYes ❑No DNA ❑Yes ONO [INA 11 Yes 0 N DNA <br /> verified functional after testing? <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> FEB 1 1 2014 <br /> 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an <br /> asterisk(*)is "NO"or"NA",the entire sump must be tested. (See S7./RCB LG-160) <br />