COMPLIANCE INFO_1998 - 2001 - Laserfiche WebLink

Home Browse Search

General Requirements 2 of a 1.02 CONSTRUCTION REQUIREMENTS AND CONDUCT OF WORK A. General Contractor's performance of Work hereunder shall be to the satisfaction of PG&E. Responsibility to complete and guarantee the Work as specified shall remain with Contractor. Contractor's Work shall be carried out according to sound professional procedures and practice generally accepted within construction industry and jointly with other operations at the site. D. Contractor shall fully inform themselves of and shall comply with all laws, regulations, and orders of governmental authorities which may affect the conduct of the Work hereunder, particularly in regard to disposal of waste material and clearing or burning of combustible material. Contractor shall be responsible for and shall remove all non-hazardous wastes from the work site. Any hazardous wastes resulting from the work shall be formally turned-over to PG&E for proper disposal. All non-hazardous waste material and debris shall become the property of Contractor, transportation and disposal thereof shall be at Contractor's sole risk and expense. C. Work Assignments: The use of subcontractors does not relieve Contractor of the responsibility to perform all Work under this Contract. D. Inspection: Field inspection and tests performed by PG&E does not relieve Contractor of their responsibility to notify and coordinate with City, State, Federal, and all other agencies having jurisdiction. E. Defective Work: Any Work, material, or equipment which does not comply with the requirements of the Contract documents shall be repaired or replaced immediately by and at the expense of the Contractor. F. Delivery and Care of Material: The receiving, storage, quality, and inventory control of materials required for the Work hereunder shall be the sole responsibility of Contractor. All Work performed hereunder shall be done to the satisfaction of PG&E, but shall not be construed as to relieve Contractor of the responsibility to complete and guarantee the Work as specified_ G. Obstructions: Contractor shall remove existing obstructions as necessary to perform the Work subject to obtaining PG&E's permission. Removed obstructions shall be repaired or replaced at Contractor's sole expense as directed by PG&E. H. Patching: Contractor shall patch or repair pavement. Material used in patching and repair work shall match the existing finish as closely as possible and shall be approved by PG&E. Joints between old and new work shall be made as inconspicuous as possible. 1. Openings: Openings occurring for removal of obstructions or from relocated work shall be patched and made to appear as inconspicuous as possible. Care shall be taken in cutting existing concrete, or other material to avoid damage to a larger area than necessary. Cuts shall be made with an abrasive saw. The surface shall be scored to obtain a straight cut. Unnecessary cutting or damage shall not be tolerated.