COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 %wi Page_of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Cald.vell Systems Equipment Resolution: .005/30 min Sump# 1 Sump#2 Sump# Sump# Sump Diameter: 42" 42" Sump Depth: 4S' 45" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 24" 22„ Highest Piping Penetration: Height from Tank Top to Lowest 27, 25„ Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both x Yes ❑No ❑NA x Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)? Turbine shutdown response time Is system programmed for fail-safe x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes 0 No ❑NA shutdown?* Was fail-safe verified to be ❑Yes x No ❑NA ❑Yes x No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational? Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 8:25 9:16 Initial Reading(Rj): .00" .00" .00" .00" Test End Time: 8:55 9:46 Final Reading(RF): .00 .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-Ri): .00 .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑Fail a Pass ❑Fail G Pass E Fail ❑ Pass ❑Fail Was sensor removed for testing? xYes 0 N 0 N xYes 0 N El NA xYes ❑No DNA ❑Yes ❑No DNA Was sensor properly replaced and x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testin ? Comments— (include information on repairs made prior to testing, and recommended follow-up for jailed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(•)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)