COMPLIANCE INFO 2003 - 2006 - Laserfiche WebLink

Home Browse Search

MONITQ,RING SYSTEM CEMT ,F TION se By All Jurisdictions Within the State of Calif'! Authority Cited: Chapter 6.7, HlWth and Safety Code; Chapter 16, Division 3 Title 23, Momia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or report must be prepared for each monitorinq system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: CONOCO PHILLIPS #2708671 Site Address: 8606 THORNTON ROAD Facility Contact Person: MANAGER Make/Model of Monitoring System:TLS350 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced City: STOCKTON Contact Phone No: 478-8959 Date of Testing/Service: 03/02/2006 Work Order Number: 2241243 CA Zip: 95209 Tank ID: 1 Tank ID: 2 X In -Tank Gauging Probe. Model: MAG X In -Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 407 Annular Space or Vault Sensor. Model: 407 X Piping Sump/Trench Sensor(s). Model: 208 Piping Sump/Trench Sensor(s). Model: 208 Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: LD2000 Mechanical Line Leak Detector. Model: LD2000 Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Tank ID: 3 Tank ID: X In -Tank Gauging Probe. Model: MAG In -Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: 407 Annular Space or Vault Sensor. Model: X Piping Sump/Trench Sensor(s). Model: 208 Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: X Mechanical Line Leak Detector. Model: MLD Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overril/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). 7 Other (specify equipment type and model in Section E on page 2). Dispenser : 1/2 Dispenser ID: 3/4 ❑ Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s) Model: X❑ Shear Valve(s). X Shear Valve(s) MDispenser Containment Float(s) and Chain(s). X Dispenser Containment Float(s) and Chain(s). Dispenser lD: Dispenser ID: FiDispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: F]Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser lD: Dispenser lD: F]Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: Shear Valve(s). Shear Valve(s). ID Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): ❑X System set-up X❑ Alarm history report Technician Name (print): RHOME DESBIENS Certification No.: 1938 Signature: License. No.: Testing Company Name:Tanknology Phone No.: (800) 800-4633 Site Address: 8501 N. MoPac Expressway, suite 400, Austin, TX 78759 Date of Testing/Servicing: 03/02/2006 Monitoring System Certification Page 1 of 3 Based on CA form dated 03/01