COMPLIANCE INFO 2012-2015 - Laserfiche WebLink

Home Browse Search

Page 7 of 9 8. FELL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑ Other(Spec) Test Method Used: ❑Pressure ❑vacuum N Hydrostatic ❑ Other(Specify) Test Equipment Used: See attached testing procedures Equipment Resolution: Fill Sump#87 Fill Sump#89 Fill Sump #91 Fill Sump# Sump Diameter: 48" 48" 48" Sump Depth: 73" 72" 70" Height from Tank Tap to Top of 25" 25" 24" Highest Piping Penetration: Height from Tank Top to Lowest 32" 30" 31" Electrical Penetration: Condition of sump prior to Fair Fair Fair testing: Portion of Sump Tested Above highest Above highest Above highest Above highest penetration penetration nenetration penetration Sump Material&Manufacturer: Fiberglass Fiberglass Fiber lass Wait time between applying pressure/vacuum/waterand 30 minutes 30 minutes 30 minutes 30 minutes starting test: Test Start Time: 12:08pm 11:16am 10:46am Initial Reading(RI): 3.5585 1.3326 4.5509 Test End Time: 12:23pm 11:31am 11:01am Final Reading(RF): 3.5590 1.3325 4.5507 Test Duration: 15 min 15 min 15 min 15 min Change in Reading(R,-R,): 0.00043 0.00010 0.00028 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Re ® Pass ❑ Fail 0 Pass ❑ Fail Z Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sump? N Yes ❑ No ® Yes ❑ No N Yes ❑ No N Yes ❑No Does the sensor alarm when either product or water is ❑Yes ❑No ENA ❑Yes❑No NNA []Yes[:]No ENA ❑Yes❑No NNA detected? Was sensor removed for testing? ®yes ❑No ❑NA ®YesYes [:]No ❑ Yes No ❑No❑NA NA NA Was sensor properly replaced and SYes ❑No ❑NA ®Yes ❑No[INA ®Yes ❑No❑NA NYes [:]No❑NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests)