Laserfiche WebLink
SWRCB, January 2002 <br />8. FILL RISER CONTAINMENT SiIMP TFSTINC <br />Page of <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />X <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: <br />_ Sump Manufacturer <br />❑ Other (Spec) <br />D Industry Standard ❑ Professional Engineer <br />Test Method Used: <br />❑ Pressure <br />❑ Other (Spec) <br />Vacuum <br />❑ Hydrostatic <br />Test Equipment Used: <br />Equipment Resolution: <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Diameter: <br />Sump Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />water and starting test: <br />Test Start Time: <br />Initial Reading (R,): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF -RI): <br />Pass/Fail Threshold or Criteria: <br />Test Result: <br />❑ Pass ❑ Fail <br />❑ Pass ❑ Fail <br />❑ Pass []Fail <br />❑ Pass []Fail <br />Is there a sensor in the sump? <br />Yes No <br />Yes No <br />L Yes 1 No <br />Yes <br />No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />_l Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />-1 Yes ❑ No <br />_ NA <br />Was sensor removed for testing? <br />-]Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No <br />❑ NA <br />Was sensor properly replaced and <br />verified functional after testing? <br />-1 Yes ❑��E] <br />❑ Yes ElNo F1 NA <br />El Yes 11 No El NA <br />❑ Yes El No <br />—NA <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />