Laserfiche WebLink
FOOD SERVICE EQUIPMENT Section 11400 <br /> system shall be subjected to a vacuum to 100 microns for a period of 24 hours. <br /> O. Charging System: <br /> 1. Provide refrigerant and oil, charge all systems and run an operational check for <br /> three (3) days duration. <br /> P. Work by other trades: Final wiring of connections, interwiring of time clocks and <br /> defrost relays, drain tubing from unit evaporators to nearest indirect drain, building <br /> sleeves, penetrations, conduit and/or pull boxes provided under applicable General, <br /> Plumbing and or Electrical Sections. <br /> Q. Unit evaporators and condensing units as shown on the drawings and as specified <br /> are intended as a guide only and shall be verified and installed under the supervising <br /> of a competent refrigeration engineer. <br /> R. Provide a metal backed baked (black and white) enamel wiring diagram for the <br /> system mounted on the outside panel of the unit evaporator and condensing unit. <br /> S. Provide shop drawings and brochures for review,showing exact overall dimensions and <br /> weights, utility requirements, all accessories and piping diagrams, all conforming to all <br /> applicable codes and regulations. <br /> Please note that the location of the condensing units are to be outside and are to be complete with "winter <br /> controls and covers". The location of these condensing units will not exceed a distance of more than 50 <br /> feet from the walk-in. Actual location to be verified with Architect or General Contractor. This unit to <br /> comply with all codes and standards of NSF, UL, IC130, Class I material. Factory Mutual Insurance <br /> System. Provide and extended warranty of all refrigeration systems. <br /> Alternates: KoolStar, Thermalrite, OmniTemp Refrigeration, Cold Zone <br /> Item#5 Freezer Walk-In Unit: : To be Pacific Refrigerator Company. Assembly shall consist of <br /> one (1) freezer compartment 7'-6"wide x 10'-4" deep and 8'-6" high (clear interior <br /> dimensions). Assembly to form the configuration as shown on the drawings and as <br /> specified in item#4. Verify floor covering i.e., quarry tile and allow for clearance at door. <br /> Alternates: KoolStar, Thermalrite <br /> Item#6 Handwash Sink: To be an Advance TABCO, model#7-PS-50, complete with wrist-action <br /> handles. This unit to be mounted at ADA height. District to furnish soap and paper towel <br /> dispenser. <br /> Alternates: Fisher, IMC Teddy <br /> Item#7 Pot and Pan Racks (mobile): To be InterMetro Industries Inc., model#N456EC, stem <br /> caster units. Two (2) units required. <br /> Alternates: ISS, Hodges <br /> Item#8 Slicer w/Stainless Steel Cart(mobile): To be Hobart Corp, #2912, Food Slicer, 6-speed <br /> semi-automatic angle feed w/low fence, 115/60/1, 1/2-HP, 12" dia. knife, top mounted <br /> sharpener, dbl. action indexing cam, Stay Sharp knife, permanent knife ring guard, <br /> anodized alum. finish, tilting removable carriage. <br /> Valentine M. Peyton Elementary School 14 Job No. 2749 <br />