COMPLIANCE INFO 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 7. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Page of Test Method Developed By: ❑ UDC Manufacturer 0 Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum O Hydrostatic ❑ Other (Spec) Test Equipment Used: TS -STS Equipment Resolution: 0.00" UDC # 1-2 UDC # 3-4 UDC # 5-6 UDC # 7-8 UDC Manufacturer: Unknown Unknown Unknown Unknown UDC Material: Fiberglass Fiberglass Fiberglass Fiberglass UDC Depth: 40.00" 40.00" 40.00" 40.00" Height from UDC Bottom to Top of Highest Piping Penetration: 18.00" 18.00" 18.00" 18.00" Height from UDC Bottom to Lowest Electrical Penetration: 24.00" 24.00" 24.00" 24.00" Condition of UDC prior to testing: Clean dry Clean dry Clean dry Clean dry Portion of UDC Tested' Highest penetration Highest penetration Highest penetration Highest penetration Does turbine shut down when UDC sensor detects liquid (both product and water)?* []Yes ❑No ONA ❑Yes []No ONA []Yes ❑No ONA []Yes ❑No ONA Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail- safe shutdown?` []Yes ❑No ONA ❑Yes []No ONA ❑Yes []No ONA ❑Yes ❑No ONA Was fail-safe verified to be o erational?` ❑Yes ❑No []NA ❑Yes ❑No []NA ❑Yes ❑No NA [] ❑Yes ❑No ONA Wait time between applying pressure/vacuum/water and starting test 5min 5min 5min 5min Test Start Time: Initial Reading (RI): SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS Test End Time: Final Reading (RF): Test Duration: 15min 15min 15min 15min Change in Reading RF-Rl : Pass/Fail Threshold or Criteria: 0.002" 0.002" 0.002" 0.002" Test Result: [] Pass ❑ Fail [] Pass ❑ Fail [] Pass ❑ Fail [] Pass ❑ Fail Was sensor removed for testing? [] Yes ❑No [INA [] Yes []No []NA OYes ❑No []NA OYes []No [INA Was sensor properly replaced and verified functional after testing? [] yes ❑No [INA []Yes []No [INA []Yes []No [INA I OYes ❑No [INA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)