COMPLIANCE INFO 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 S. FILL RISER CONTAINMENT SUMP TESTING Page 10 of Facility is Not Equipped With Fill Riser Containment Sums ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer DIndustry Standard []Professional Engineer []Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum OHydrostatic ❑ Other (Spec) Test Equipment Used: TS -STS Equipment Resolution: 0.00" Sump Diameter: Fill Sump # 91 Fill Sump # 87-1 Fill Sump # 87-2 Fill Sump # 87 Slave 39.00" 39.00" 39.00" 39.00" Sump Depth: 72.00" 72.00" 72.00" 72.00" Height from Tank Top to Top of Highest Piping Penetration: 18.00" 18.00" 18.00" 18.00" Height from Tank Top to Lowest Electrical Penetration: 40.00" 40.00" 40.00" 40.00" Condition of sump prior to testing: Clean dry Clean dry Clean dry Clean dry Portion of Sump Tested Highest penetration Highest penetration Highest penetration Highest penetration Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and starting test: 5min 5min 5min 5min Test Start Time: Initial Reading (RI): SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS SEE INCON RESULTS Test End Time: Final Reading (RF): Test Duration: 15min 15min 15min 15min Change in Reading (RF-Rj): Pass/Fail Threshold or Criteria: 0.002" 0.002" 0.002" 0.002" Test Result: " Pass ❑ Fail " Pass ❑ Fail " Pass ❑ Fail " Pass ❑ Fail Is there a sensor in the sump? O Yes []No O Yes ❑ No O Yes ❑ No "Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes ❑No ONA ❑Yes ❑No ONA ❑Yes ❑No ONA ❑Yes ❑No ONA Was sensor removed for testing? O Yes ❑No ONA OYes No ❑NA"Yes ❑No [INAOYes ❑No ONA Was sensor properly replaced and verified functional after testing? O Yes ❑ No [INA OYes []No ONA "Yes []No ONA OYes ❑No ONA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)