COMPLIANCE INFO 2013 - 2018 - Laserfiche WebLink

Home Browse Search

8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested- ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon Sump Tester Equipment Resolution: +,i- 0.002" Fill Sump # 91 Fill Sump # Diesel 81 42" Sump Diameter: 42" 42" Sump Depth: 68" 66" 68" Height from Tank Top to Top of Highest Piping Penetration: N/A N/A N/A Height from Tank Top to Lowest Electrical Penetration: 20" 20" 18" Condition of sump prior to testing: Good Good Good Portion of Sump Tested 2" above piping 2" above piping 2" above piping Sump Material: Fiberglass Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and starting test: 30 minutes 30 minutes 30 minutes Test Start Time: 9:19 am 9:46 am 10:11 am Initial Reading (R,): 3.9142 3.9265 7.2823 Test End Time: 9:35 am 10:01 am 10:26 am Final Reading (RF): 3.9142 3.9268 7.2824 Test Duration: 16 min. 15 min. 15 min. Change in Reading (RF -RI): 0.0000 0.0003 0.0001 Pass/Fail Threshold or Criteria: +/-0.002" +/- 0.002" +/- 0.002" Test Result: ® Pass ❑ Fail ® Pass ❑ Fail O Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ® Yes ❑ No ® Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Was sensor removed for testing? ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ®yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Sensor functionality was not confirmed. This procedure is not part of the Secondary Containment testing scope of work