COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

DATE: 1 1 1 Miscellaneous Fixed Roof Repairs Gauge Hatch Repairs (ITEM 141 CODE 6) 1. The existing gauge hatch is missing a seal.A new compatible seal shall be installed in the gauge hatch or the existin hatch shall be removed and replaced with a new hatch included a seal. 2. 1 -• The completed repair shall be visually inspected by a BP representative. Tank Gauge System & High Level Alarm System Repairs Tank Gauge Svstem Repairs 1. The tank gauge system shall be serviced in accordance with manufacturer's recommendations.The gauge float, elbow sheaves, and cable shall be inspected, serviced, repaired and replaced as required.The entire system shall be serviced in accordance with the manufacturer's recommendations. 2. The tank au a system shall be checked for proper operation. 3. 1 -• The completed work shall be visually inspected by a BP representative. High Level Alarm System Rsoairs 1. The Level Detector and High 1 High-High Level Switches shall be serviced In accoroance with manufaolurers recommendations. The detector and switches shall be inspected, serviced, repaired and replaced as required.The entire system shall be serviced in accordance with the manufacturers recommendations.This work shall be performed by Others. 2. The Level Detector and switches shall be checked for proper operation by Others. 3. WROMi The completed work shall be visually inspected by a BP representative. Miscellaneous Structural Repairs Roof Access Repairs (ITEM 171 CODE 5)(CHAHGE—Rev.1) 1. The existing caged ladder is comingled with the existing roof handrails resulting in an awkward and unsafe access to the fixed roof. The existing handrails and the top part of the caged ladder shall be modified to widen the passage way from the ladder to the fixed roof to provide safe and convenient access to the fixed roof.The existing handralls shall be modified as required to complete the work. 2. The enclosed walking surfaces to access roof n=Ies shall be inspected to determine if the roof plate is sound enough for people M walk on. 3. 21fir,111-MR The roof surfaces shall be visually inspected(VT)by a BP representative. 4. The wing handrail shall be as specified and shown below: a. Handrail Height 42' b. Handrail Posts 2-112"x 2-112"x 114'Angle,A-36 @ 96"or less C. Top rail and Mklrail 2-1/2"x 2-12'x IWAngle,A.36 d. Michail 2.112"x tl4"Flat Bar,A-36 e. Toeboard 1l4"x 4' Flat Bar,A-36 5. A minimum 6'diameter x W A36 bearing pad shall be installed and seal welded at all connections to the tank roof. 6. • 1 •1 All completed welds shall be visually inspected(VT)by a BP representative. 7. 1 -• The completed repair shall be visually Inspected(VT)by a BP representative.