COMPLIANCE INFO 1994 - 2010 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sum Fill Riser Containment Sumps are Present, but were Not Tested `C t est meLnou ueveiopea tsy: I Sump Manufacturer C Industry Standard C Other (Speck) Test Method Used: Pressure = Other (Spec) C Vacuum Page _ 7 of `a Professional Engineer Hydrostatic Test Equipment Used: IEquipment Resolution: Fill Sum ## Fill Sum # Fill Sum ff Fill Sum # Sum Diameter: Sump Depth: Height from Tank Top to Top of Highest Piping Penetration: -1 Height from Tank Top to Lowest Electrical Penetration - Condition of sump prior to testing: Portion of Sump Tested Sump Material: Wait time between applying pressure/vacuum/water and -starting test: Test Start Time: Initial Reading (R,): Test End Time: Final Reading (RF): Test Duration: Chane in Reading RF -R,): Pass/Fail Threshold or Criteria: Test Result: Is there a sensor in tete sump? Does the sensor alarm when either product or'water is detected? ❑ Pass ❑ Fail ❑ Yes G No ❑ Yes ❑ No ❑ NA ❑ Pass ❑ Fail ❑ Yes ❑ No ❑ Yes ❑ No ❑ NA ❑ Pass ❑ Fail 11 Yes ❑ No ❑ Yes ❑ No C NA 0 Pass ❑ Fail ❑ Yes ❑ No ❑ Yes :i No ❑ NA Was sensor removed for testing? Was sensor property replaced and verified functional after testing? ❑ Yes C No ❑ Yes O No ❑ NA ❑ NA ❑ Yes u No ❑ NA ❑ Yes C No ❑ NA ❑ Yes G No C NA ❑ Yes G No ❑ NA ❑ Yes C No C Yes C No C NA — CNA Comments — (include information on repairs made prior to testing, and recommendedJollow-up for failed tests)