SU0003054 - Laserfiche WebLink

Home Browse Search

SPEC. PRIME CONSTR. CONTRACT - EXHIBIT A June 9, 1995 Pg. 2 of 7 CONCRETE WORK (cont'd) F) Concrete pad and mixer foundations are assumed to be the dimensions shown on the structural foundation drawing. The concrete lined settling pond is assumed to be the dimensions shown on the settling pond details on the site plan. No provisions have been made for a larger concrete pad for the building foundation or mixer foundation than shown on the drawings. No provisions have been made for a larger settling pond than shown on the site plan drawings. G) Contractor has only included charges to do what grading is required to put area immediately around new addition and settling pond back to the condition it was in at the beginning of the project. Nothing has been included for site grading, paving, stabilizing, or exterior drainage. H) Contractor to furnish and install all rebar and wire mesh. Any additions will be charged as an extra under the prime construction contract. Anchor bolts to be furnished by Owner. I) Concrete quoted is five sack mix readimix concrete. Contractor acknowledges that the concrete strength must meet the requirements of the structural foundation plan notes shown on Dwg. #S2. BUILDING MODIFICATION& ADDITION Modification of Existing Building A) Building modifications are to be performed by Contractor and materials are to be supplied by Owner unless otherwise noted below. B) Building siding to all be 26 GA, standard CBC siding or LIBERTY color to match existing CBC siding. Roof and trim to be white. B) The South wall of the 1991 Dry Products addition building shall be completed and enclosed with metal siding. The metal siding and Z bars removed from the East warehouse wall shall be used to complete the South wall as material quality and quantity permits; otherwise, materials shall be new and supplied by Contractor. Contractor will provide Z bars, Z bar brackets, sheeting, screws, and flashing. C) The existing metal siding separating the East side of the warehouse and the 1991 dry stucco manufacturing addition area shall be removed with the exception of the siding up to the existing 12' roll up door opening off the South wall. This removal includes removal of the 3° door and the 12' roll up door. The old siding shall be removed up to the roof. The edge of the metal siding at the location where the old 12' roll up door shall be finished with trim (existing).