Laserfiche WebLink
MONITORING AND REt—,RTING PROGRAM NO. 5-01-057 <br /> WOODBRIDGE PARTNERS INC. <br /> VICTOR FINE FOODS FACILITY <br /> FOR CLOSURE OF SURFACE IMPOUNDMENTS AND INJECTION WELL <br /> SAN JOAQUIN COUNTY <br /> Table 3- LCRS Monitoring <br /> Parameters Units <br /> Frequency <br /> Field Parameter <br /> Temperature oC <br /> Specific Conductance Semi-Annually <br /> H urncm Semi-annually <br /> p pH number Semi-annually <br /> Monitoring Parameters <br /> Total Dissolved Solids m /L Semi-annually <br /> Chloride g <br /> m /I.. Semi-annually <br /> Sulfate mg <br /> /L <br /> Semi-annually <br /> Nitrate -Nitrogen mg/L Semi-annually <br /> F- WATER QUALITY PROTECTION STANDARDS <br /> The Water Quality Protection Standard (Standard) shall consist of the following elements: <br /> 1 Constituents of Concern 4 <br /> 2. Concentration Limits . Points of Compliance <br /> 3. Monitoring Points 5. Compliance Period <br /> Each of these is described as follows: <br /> I. Constituents of Concern <br /> The `COC list, (list of Constituents of Concern required under 27 CCR 20395) shall <br /> include all constituents listed in Attachment D. The Dischargers shall monitor all COCs <br /> every five years, or more frequently if required under a corrective action monitoring <br /> program. <br /> a. Monitoring Parameters <br /> Monitoring parameters are constituents of concern that are the waste constituents, <br /> reaction products, hazardous constituents, and physical parameters that provide a <br /> reliable indication of a release from a surface impoundment. The monitoring <br /> parameters for the specified monitored medium are those li <br /> IV. sted in Table I through <br /> 2• Concentration Limits <br /> The Discharger shall determine the Concentration Limit for any given Constituent of <br /> Concern or Monitoring Parameter in a given monitored medium (i.e., surface <br /> impoundment, groundwater and vadose zone) at the facility by one of the following <br /> methods. These concentration limits shall be used as the basis of comparison with data <br /> from the Monitoring Points in that monitored medium. <br />