Laserfiche WebLink
Brown Sand,Inc. <br /> Spill Prevention, Control, and Countermeasures Plan Page: 13 <br /> June 3, 2020 <br /> 3.4.4 Drainage of Un-Diked Areas (40 CFR 112.8(b)(3)) <br /> There are no un-diked areas of the facility that have a potential to discharge oil as <br /> a result of a release. Tank loading/ unloading procedures are closely followed as <br /> outlined in Section 3.11 in order to prevent a release from occurring, and the <br /> Spill/Discharge Response Plan, located in Section 4.0 of this plan, outlines the <br /> facility's spill response procedures. <br /> 3.4.5 Overfill Prevention Systems (40 CFR 112.8(e)(8)) <br /> The On-road diesel tank, gasoline tank, and two off-road diesel tanks are equipped <br /> with ST90 wireless tank monitor, electronic liquid sensing devices and tank level <br /> gauges. Loading/unloading procedures are discussed in Section 3.11. All sensing <br /> devices and gauges are inspected and tested on a regular basis to ensure proper <br /> operation. <br /> Prior to the filling of the waste oil tank, the liquid volume is measured with a <br /> calibrated measuring stick, as well as periodically during filling activities. <br /> Storage drums or small containers are not refilled; therefore,they do not require an <br /> overfill prevention system. <br /> 3.4.6 Visible Discharges (40 CFR 112.8(c)(10)) <br /> Visible discharges from any container or appurtenance, including seams, gaskets, <br /> piping,pumps, valves, rivets, and bolts, are quickly corrected upon discovery. Oil <br /> is promptly cleaned up and removed from the facility in accordance with the waste <br /> disposal method described in Section 4.7 of this plan. <br /> 3.4.7 Mobile and Portable Containers (40 CFR 112.8(c)(11)) <br /> Small portable storage containers(i.e. 55-gallon drums) are stored inside the Drum <br /> Storage Area. Any spilled material is quickly contained and cleaned up using <br /> absorbent material and appropriate cleaning products as outlined in the <br /> Spill/Discharge Response Plan, located in Section 4.0 of this plan. <br /> 3.4.8 Corrosion Protection (40 CFR 112.8(c)(4)) <br /> There are no underground storage tanks or underground product lines present at <br /> this facility. Therefore, corrosion protection is not applicable to this facility. <br />