COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

Brown Sand,Inc. Spill Prevention, Control, and Countermeasures Plan Page: 25 June 3, 2020 The maintenance supervisor or his/her designee supervises oil deliveries for all new suppliers, and periodically observes deliveries for existing approved suppliers. All loading and unloading of tank vehicles or fleet vehicles takes place only in the designated loading/unloading areas. Vehicle filling operations are performed by facility personnel trained in proper discharge prevention procedures. The truck driver or facility personnel must remain with the vehicle at all times while fuel is being transferred from the tank to the vehicle. Transfer operations are performed according to the minimum procedures outlined in the table below. Stage Task • Visually check all hoses for leaks and wet spots. Prior to • Verify that sufficient volume is available in the storage tank Loading/Unloading (check liquid gauges). • Secure the tank vehicle with wheel chocks and interlocks. • Ensure the vehicle's parking brakes are set. • Verify proper alignment of valves and proper functioning of the pumping system. • Establish adequate bonding/grounding prior to connecting to the fuel transfer point. • Driver must stay with the vehicle at all times during During loading/unloading activities. Loading/Unloading • Periodically inspect all systems,hoses and connections • When loading,keep internal and external valves on the receiving tank open along with the pressure relief valves. • When making a connection, shut off the vehicle engine. When transferring Class 3 material, shut off the vehicle unless it is used to operate the pump. • Maintain communication with the pumping and receiving station. • Monitor the liquid level in the receiving tank to prevent overflow. • Monitor flow meters to determine rate of flow. • When topping off the tank,reduce flow rate to prevent overflow.