COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

Brown Sand,Inc. Spill Prevention, Control, and Countermeasures Plan Page: 26 June 3, 2020 Stage Task • Make sure the transfer operation is completed. After • Close all tank and loading valves before disconnecting. Loading/Unloading • Securely close all vehicle internal, external, and dome cover valves before disconnecting. • Secure all hatches. • Disconnect grounding/bonding wires. • Make sure the hoses are drained to remove the remaining oil before moving them away from the connection.Use a drip pan. • Cap the end of the hose and other connecting devices before moving them to prevent uncontrolled leakage. • Remove wheel chocks and interlocks. • Inspect the lowermost drain and all outlets on tank truck prior to departure. If necessary,tighten adjust, or replace caps,valves, or other equipment to prevent oil leaking while in transit. 3.12 Brittle Fraction Evaluation (40 CFR 112.7(i)) All aboveground storage tanks used and operated at the Brown Sand, Inc. facility were shop-built tanks; no "field-constructed" tanks are present on the subject property. Therefore, a brittle fraction evaluation is not applicable at this facility. 3.13 Conformance with State and Local Applicable Requirements (40 CFR 112.70)) All bulk tanks at this facility are registered with the state and local authorities and have current certifications of registration and special use permits required by the local fire code. 3.14 Transfer Operations,Pumping, and In-Plant Processes (40 CFR 112.8(d)) Transfer operations at this facility include: • The filling of facility delivery trucks using the associated fuel dispensers. • The transfer of fuel and oils from tanker trucks at the unloading areas. • The transfer of oils from to vehicles under repair. Lines that are not in service or are on standby for an extended period of time are capped or blank-flanged and marked as to their origin.