Laserfiche WebLink
CMove auger cuttings away from the auger with a long-handled shovel or spade, <br /> never use hands or feet. <br /> Never clean an auger attached to the drill rig unless the engine is off, and the auger <br /> has stopped rotting. <br /> 509.8 Safe Use of Hand Tools <br /> Rules described in 29 CFR 1926.301, 302, EM 385-1-1, whichever is more <br /> restrictive, shall be observed in addition to the guidelines provided below: <br /> • Each tool should be used only to perform task for which it was originally designed- <br /> Damaged <br /> esignedDamaged tools should be repaired before use or discarded. <br /> • Safety goggles or glasses should be worn when using a hammer of chisel. Nearby <br /> co-workers and by-standers should be required to wear safety goggles or glasses <br /> C <br /> also. <br /> • Tools should be kept cleaned and stored in an orderly manner when not in use. <br /> 509.9 Safe Use of Wire Line Hoists, Wire rope, and Hoisting Hardware <br /> Safety rules described in 29 CFR 1926.552, EM 385-1-1, and guideline contained <br /> in the Wire RPE Users Manual Published by the American Iron and Steel Institute shall be <br /> used whenever wire line hoists, wire rope,or hoisting hardware are used. <br /> 509.90 Protective Gear <br /> 509.10.1 Minimum Protective Gear <br /> Items listed below should be worn by all members of the drilling team while <br /> engaged in drilling activities. <br /> • Hard Hat <br />