COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

RECEIVED ITEC 3 0 2010 7. UNDER-DISPENSER.CONTAINMENT(UDC)TESTING Test Method Developed By: ❑ UDC Manufacturer ®Industry Standard ❑ RA14idA&N � g1 El Other(Spec) MENT Test Method Used: ❑Pressure ❑ Vacuum ®Hydrostatic ❑ Other(Spec) Test Equipment Used: Incon Sump Tester Equipment Resolution: +/-0.002" UDC#1/2 UDC#3/4 UDC#5/6 UDC#7/8 e. UDC Manufacturer: Bravo Bravo Bravo Bravo UDC Material: Steel Steel Steel Steel UDC Depth: 12" 12" 12" 12" Height from UDC Bottom to Top Bottom Bottom Bottom Bottom of Highest P!pi!lg Penetration: Height from UDC Bottom to Bottom Bottom Bottom Bottom Lowest Electrical Penetration: Condition of UDC prior to Good Good Good Good testing: Portion of UDC Tested 2"above RiRin2"above piping 2"above piping 2"above piping Does turbine shut down when UDC sensor detects liquid(both ❑Yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA product and water)?. Turbine shutdown response time N/A N/A NIA N/A Is system programmed for fail- ❑yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA safe shutdown?` Was fail-safe verified to be ❑yes❑No 0 NA ❑Yes❑No 0 NA ❑Yes❑No ®NA ❑Yes❑No ®NA operational?* Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes starting test Test Start Time: 1:16 pm 1:16 pm 2:18 pm 2:18 pm Initial Reading(RO: 1.3734 1.0952 0.3449 0.7096 Test End Time: 1:31 pm 1:31 pm 2:33 pra 2:33 pm Final Reading(RF): 1.3751 1.0953 0.3454 0.7072 Test Duration: 15 min. 15 min. 15 min. 15 min. Chane in Reading(RF-R,): 0.0017 0.0001 0.0005 0.0024 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" +/-0.00211 Test Result: ® Pass ®Fail ® Pass 0 Fail ® Pass ❑Fail n Pass ®Fail Was sensor removed for testing? ❑Yes❑No®NA ❑Yes❑No U NA ❑Yes❑No®NA ❑Yes❑No®NA Was sensor properly replaced and ❑yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA verified functional after testing?____ Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work". UDC 7/8 Failed(needs further investigating) 1 If the entire depth of the UDC is not tested,specify how much was tested. If the answer to gLny of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)