COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

' Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon Sump Tester Equipment Resolution: +/- 0.002" STP Sump # 87 STP Sump # 91 Sump Diameter: 42" 42" Sump Depth: 58" 58" Sump Material: Fiberglass Fiberglass' " Height from Tank Top to Top of Highest Piping Penetration; 22) 23. Height from Tank Top to Lowest Electrical Penetration: 19"193, _ FEB B Condition of sump prior to testing: Good Good HEALTH Portion of Sump Tested' 2" above piping 2" above piping 1RUMMENTAL Does turbine shut down when sump sensor detects liquid (both product and water)?` Q Yes ❑ No ®NA ❑ Yes Q No ®NA DEPARTMENT i Turbine shutdown response time N/A N/A l Is system programmed for fail-safe shutdown?` ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ® NA Was fail-safe verified to be operational?* ® Yes ❑ No ® NA ❑ Yes ❑ No ® NA Wait time between applying pressure/vacuum/water and starting test: 30 minutes 30 minutes Test Start Time: 8:48 am 8:48 am Initial Reading (Rj): 2.7156 3.7598 Test End Time: 9:03 am 9:03 am Final Reading (RF): 2.7155 3.7601 Test Duration: 15 min. 15 min. Change in Reading (RF -RI): 0.0001 0.0003 Pass/Fail Threshold or Criteria: +/-0,00211 +/- 0.002" Test Result: ® Pass ❑ Fail ® Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ® Yes Q No ❑ NA ® Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) "Sensor functionality was not confirmed. This procedure is not part of the Secondary Containment testing scope of work". ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to gLny of the questions indicated with an asterisk(*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)