Laserfiche WebLink
n 1 1 <br />The OPW 61 SO is available in two <br />styles for two point fill applications <br />with separate product and vapor con- <br />nections. The OPW 61 SO replaces the <br />standard fill tube in the 4" fill riser pipe. <br />The 61SOM models are designed for <br />compatibility with M-85 and M-100 <br />methanol fuels. Both the OPW 61 SO <br />and 61SOM are available with sealed <br />vapor paths for use in CARB certified <br />areas. The OPW 61SO- 1000 and 61SO- <br />100C(CARB) feature a groove that runs <br />the full length of the tube to allow a <br />gauging system to be used in conjunc- <br />tion with the overfill prevention system. <br />luating Float <br />The OPW 61 SOR is designed for two <br />point remote fill applications, where the <br />fill point is not directly over the UST. <br />A "trap door" assembly installed in the <br />riser above the tank provides access for <br />a gauging stick. <br />EIL P REVE <br />The OPW 61SOC is available for <br />coaxial fill, single product/vapor con- <br />nection applications. This member of <br />the series replaces the standard coaxial <br />fill drop tube in a 4" tank riser pipe. <br />0-Y Two Point <br />Designed for use with two point fill <br />applications, the OPW 61SO-3000 <br />replaces the drop tube in 3" tank riser <br />pipes. <br />ION VALVES <br />The OPW 61 SOP is available for <br />poppeted coaxial fill applications and is . <br />CARB certified for gasoline vapor <br />recovery systems. (Executive order <br />G-70-52AN). <br />aLill Ejiii <br />Shipped without drop tubes, the <br />61SO-4BYT is designed to adapt to <br />existing coaxial and conventional drop <br />tubes that meet specific OPW stan- <br />dards. (The 61SOC-4BYT kit is <br />required to adapt the 61 SO-4BYT for <br />coaxial applications.) <br />0 <br />