COMPLIANCE INFO_1994-2006 - Laserfiche WebLink

Home Browse Search

r SWRCB,January 2002 Page_4_of—4- 6. PIPING SUMP TESTING Test Method Developed By: Sump Manufacturer ®Industry Standard Professional Engineer Other(Specify) Test Method Used: Pressure Vacuum ®Hydrostatic Other(Specify) Test Equipment Used: INCON TS-STS UNIT Equipment Resolution: N/A Sump#1052 Sump# Sump# Sump# Sump Diameter: 38" Sump Depth: 41" Sump Material: FIBERGLASS Height from Tank Top to Top of 16, Highest Piping Penetration: Height from Tank Top to Lowest 10" Electrical Penetration: Condition of sump prior to testing: GOOD 2"ABOVE SUMPS Portion of Sump Testes HIGST PRODUCT PIPING PENETRATION Does turbine shut down when sump sensor detects liquid(both Yes No ®NA Yes No NA Yes No NA Yes No NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe Yes No U NA Yes No NA Yes No NA Yes No NA shutdown?{ Was fail-safe verified to be Yes No ®NA Yes No NA Yes No NA Yes No NA o erationalf Wait time between applying pressure/vacuum/water and starting 15 MINUTES test: Test Start Time: 10:45 11:01 Initial Reading(RI): 5.2639 5.2635 Test End Time: 11:00 11:16 Final Reading(RF): 5.2637 5.2635 Test Duration: 15 MIN 15 MIN Change in Reading(RF-R,): -.0002 -.0000 Pass/Fail Threshold or Criteria: .002 .002 Test Result: 0Pass ' ❑Fail Pass Fail Pass Fail Pass Fail Was sensor removed for testing? ®Yes No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and ®Yes No NA Yes No NA Yes No NA Yes No NA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) *Piping Sump passed the industry standard hydrostatic test. No repairs are needed at present time. If the entire depth of the sump is not tested,specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)