COMPLIANCE INFO_2007-2012 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 4 of 5 6.PIPING SUMP TESTING Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other(Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other(Specify) Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 Sump#Piping Sump# Sump# Sump# UE058U002 Sump Diameter 38" Sump Depth 42" Sump Material Fiberglass Height from Tank Top to Top of 22" Highest Piping Penetration Height from Tank Top to Lowest 21" Electrical Penetration Condition of sump prior to testing Good Portion of Sump Tested(1) pe above highest enetration Does turbine shut down when sump sensor detects liquid(both ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA product and water)?* Turbine shutdown response time NA Is sytem programmed for fail-safe ❑ Yes ❑ No N NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA op erational?* Wait time between applying pressure/vacuum/water and starting 15 min test Test Start Time 9:36 am 9:54 am Initial Reading Ri) 4.1227 4.1225 Test End Time 9:51 am 10:10 am Final Reading R 4.1226 4.1225 Test Duration 15 min 15 min Chane in Reading Rf-Ri .0001 .0000 Pass/Fail Threshold or Criteria .002 Test Result ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and ❑ Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA verified functional after testin ? Comments include any information on repairs made prior to testing,and recommended follow-up for failed tests The sensor was reinstalled to the lowest point but not tested. (1)If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)