COMPLIANCE INFO_2007-2012 - Laserfiche WebLink

Home Browse Search

' If the entire depth of the sump is not tested, specify how much was tested. If the answer to gRy of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160) SWRCB, January 2002 Page _4_ of —4- 6. PIPING SUMP TESTING Test Method Developed By: Sump Manufacturer ® Industry Standard Professional Engineer Other (Specify) Test Method Used: Pressure Vacuum ® Hydrostatic Other (Specify) Test Equipment Used: INCON TS -STS UNIT Equipment Resolution: N/A Sump # DIESEL Sump # Sump # Sump # !Sump Diameter: 38" mp Depth: 42" Sump Material: FIBERGLASS Height from Tank Top to Top of 22" Highest Piping Penetration: Height from Tank Top to Lowest 21" Electrical Penetration: Condition of sump prior to testing: GOOD 2" ABOVE SUMPS Portion of Sump Tested' HIGHEST PRODUCT/VENT PENETRATION Does turbine shut down when sump sensor detects liquid (both Yes No ® NA Yes No NA Yes No NA Yes No NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe Yes No ® NA Yes No NA Yes No NA Yes No NA shutdown?* Was fail-safe verified to be Yes No ® NA Yes No NA Yes No NA Yes No NA operational?* Wait time between applying pressure/vacuum/water and starting 15 MINUTES test: Test Start Time: 10:06 10;22 Initial Reading (Ri): 6.3623 6.3621 Test End Time: 10:21 10:37 Final Reading (RF): 6.3620 6.3620 Test Duration: 15 MIN 15 MIN Change in Reading (RF-Ri): -.0003 -.0001 Pass/Fail Threshold or Criteria: .002 .002 Test Result: 0 Pass Fail Pass Fail Pass Fail Pass Fair Was sensor removed for testing? ® Yes No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and ® Yes No NA Yes No NA Yes No NA Yes No NA verified functional after testing? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) *Piping Sump passed the industry standard hydrostatic test. No repairs are needed at present time. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to gRy of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)