Laserfiche WebLink
CNI Manufacturing Installation, Operation and Maintenance Manual (IOM) <br />Applicable to Executive Order VR -1 04-D <br />4) Install Jam Nut <br />NOTE: CNI Mfg. tool part number EVRSYS112 must be ordered separately. <br />The jam nut is only used on the product side. For ease of installation, the jam nut is included in the <br />pre -assembled Fil-Spill container CON2-31103. It's located on the second set of threads, on the <br />bottom half of the flange (See Fig. P7). <br />a) Ensure jam nut has anti -seize applied to threads, then screw in the jam nut by hand until it rests <br />against the drop tube. <br />b) Using the Jam Nut Installation/Removal tool part number EVRSYS112 (see example in Fig. P7), <br />tighten the jam nut to value specified in Table 2. The jam nut must be in contact with the drop <br />tube flange. <br />Figure P7 <br />,y <br />(Example) m <br />EVRSYS112 <br />Jam Nut Tool j a <br />Use Anti -seize compound each <br />time the jam -nut is removed. <br />First t <br />Note: <br />of thre(Jam <br />Nut is left on the top end of the) <br />(second set of threads on the flange) <br />Ovalflang <br />200JN, Drop tube <br />jam -nut <br />Second set—_ <br />ids <br />of threadsA1100EVR <br />uses, EMCO Wheaton <br />#569461 "O" -ring for drop tube <br />and <br />Bottom ofCNI <br />DT100 uses, DT101 or RP101 <br />Oval flangeDT100, <br />Drop tube <br />or <br />Riser pipe <br />- EMCO Wheaton <br />All OOEVR Guardian <br />Overfill prevention valve <br />15627 ARROW HIGHWAY, IRWINDALE, CALIFORNIA 91706 <br />PHONE (626) 962-6646; OUT OF STATE CALLS (800) 4CN1-MFG; FAx (626) 962-4854 31 <br />WEBSITE: WWW.CNI-MFG.COM EMAIL: INFOCCDCNI-MFG.COM <br />