COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMIP TESTING Test Method Developed y: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used Caldwell Systems Equipment Resolution 005/30 min Sump#1 Sump# Sump# Sump# Sump Diameter: 42" Sump Depth: 5549 Sump Material: Fiberglass Height from Tank Top to Top of 1799 Highest Piping Penetration: Height from Tank Top to Lowest 2477 Electrical Penetration: Condition of sump prior to testing: Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Is system programmed for fail-safe x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown? Was fail-safe verified to be ❑Yes x No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA o erational?" Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 12:10 Initial Reading(R,): 0099 .009, .009, .0094 Test End Time: 12:40 Final Reading(RF): .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-Rs): .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min TeatResult: x Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fall Was sensor removed for testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended ollow-u or ailed tests) s LT 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to M of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)