COMPLIANCE INFO_2007-2009 - Laserfiche WebLink

Home Browse Search

0 tom' Page 4 of 8 0& 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic ❑Other(Specify) Test Equipment Used: Caldwell Equipment Resolution: Sump 3 Sump sump Sump Sump Diameter: 42" Sump Depth: 56" Sump Material: Fiberglass Height from Tank Top to Top of 26„ Highest Piping Penetration: Height from Tank Top to Lowest 7„ Electrical Penetration: Condition of sump prior to testing: Dry _ Portion of Sump Tested' 2"Above Product Does turbine shut down when sump sensor detects liquid(both product and ❑Yes ❑ No ® NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA water)?* Turbine shutdown response time SEE COMMENT Is system programmed for fail-safe ❑Yes ❑ No ® NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be ❑Yes ❑ No IM NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA operational?* Wait time between applying pressure/vacuum/water and starting 5 minutes test: Test Start Time: 3:20 PM Initial Reading(Ri): 0.0025 Test End Time: 3:50 PM Final Reading(RF): 0.0025 Test Duration: 30 minutes Change in Reading(RF-Ri): 0 Pass/Fail Threshold or Criteria: 1/16" hr. Test Resuft: ® Pass ❑ Fail 0 Pass ❑Fail ❑Pass ❑Fait ❑ Pass ❑Fail Was sensor removed for testing? IM Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Was sensor properly replaced after ®Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA testing? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests) Turbine Shut Down done during Annual Monitoring Certification. 1 If the entire depth of the sump is not tested,specify how much was tested. If the answer to gLny of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See S"C13 LG-160)