COMPLIANCE INFO_2011-2015 - Laserfiche WebLink

Home Browse Search

Tracy Truck & Auto Stop 3940 North Tracy Blvd, Tracy SR0061995 5. Contact Thuy Tran at (209) 468-8257 to arrange the following inspection appointments (a 48- hour notice is required for inspection appointments). a. Sensor functionality: Functionality of the monitoring system must be verified to ensure that monitoring has been restored to meet the requirements of Title 23 California Code of Regulations and the Health & Safety Code. Prior to receiving fuel, a complete sensor functionality test of tank and piping monitoring system(s) and demonstration of positive shut down (if applicable). i. Functionality of Veeder-Root 208 liquid detec ion sensor of the AST transition sump and two diesel UST STP sumps 6k b. Verify position placement of sensors: ensure the monitoring equipment is capable of detecting a leak at the earliest possible opportunity. i. Placement position of Veeder-Root 208 liquid detection sensor of the AST transition sump and two diesel UST STP sumps c. Visual inspection of diesel primary and secondary piping to insure proper slope prior to backfill. d. Primary piping soap test: One hour pneumatic pressure test at 110% of operating pressure, or 40 psi, whichever is greater. i. Piping between the diesel AST to the truck side dispensers ii. Piping between the diesel UST to the truck side dispensers iii. Piping between the diesel UST to the auto side dispensers e. Secondary piping soap test: One hour pressure test per manufacturer's guidelines. If there are no manufacturer's guidelines, test shall be performed using an applicable method specified in an industry code or engineering standard. i. Piping between the diesel AST to the truck side dispensers ii. Piping between the diesel UST to the truck side dispensers iii. Piping between the diesel UST to the auto side dispensers iv. Piping between the gasoline UST to the truck side dispensers f. Leak detector test: Leak detector must be tested to confirm that the device can detect a leak of 3 gallons per hour at 10 psi. i. VMI 99 LD -2000 of the diesel 20,000 gallon UST of the auto side ii. VMI 99 LD -3000 of the diesel 20,000 gallon UST iii. FePetro STP-MLD-HCD of the diesel 15,000 gallon AST for the UST piping g. 24-hour hydrostatic test (or equivalent) on transition sump. 6. Contact Thuy Tran at (209) 468-8257 to arrange the following optional inspection appointments (a 48-hour notice is required for inspection appointments). a. Sensor functionality and verify position placement of sensors: i. Functionality of Veeder-Root 420 annular sensor of the 10,000 and 15,000 gallon AST and two diesel 20,000 gallon UST annulars'-V6 Out tef ii. Placement position of Veeder-Root 420 annular sensor of ,000 an Va t Ci` VC, 15,000 gallon AST b. Overfill prevention verification: Prior to receiving fuel, verify that external audio and visual alarm activates when AST tank is 90% full. Please be aware that the facility cannot operate the UST or UST piping prior to the EHD inspection and approval.