Laserfiche WebLink
• control points for the any support equipment while the CRZ diminishes the possibility of moving <br /> contaminants to a formerly uncontaminated area Once work commences, no outside personnel <br /> will be allowed into the exclusion zone without appropriate gear and proof of health and safety <br /> training certificates <br /> i <br /> 9.2 Decontamination Procedures <br /> Decontamination of personnel is expected to take place during the daily <br /> I <br /> operations of the system as the personnel will not be potentially exposed to the contaminants <br /> Emergency decontamination of personnel will take place to prevent the spread of contamination <br /> into clean zones, as well as to reduce exposure to personnel and the environment <br /> 9.2.1 Personnel Decontamination <br /> iPersons leaving the EZ must first follow decontamination procedures in the CRZ <br /> Hand tools and other sampling equipment used in the EZ and reusable PPE (boots, safety <br /> glasses, etc ), will be cleaned prior to removal from the site each day The step-by-step sequence <br /> for personnel decontamination is as follows <br /> + Remove boot covers (if used) at the boot-washing station and place them <br /> in the disposal container provided, <br /> • Wash outer gloves and chemical resistant boots (if used) at the boot- <br /> washing station, <br /> • Remove wrist tape (if used) and outer gloves, and place them in the <br /> disposal container provided, <br /> + Remove ankle tape (if used) and disposable coveralls (if used) and place <br /> them in the disposal container provided, <br /> • Remove respirators (if used) and place each in designated locations in the <br /> CRZ, <br /> • Remove inner gloves and place them in the disposal container provided, <br /> and <br /> 9-2 <br />