COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

v/ Page 5 of 9 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specif}) Test Method Used: ❑ Pressure ❑ vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: Level Change Indicator Equipment Resolution: 0.0025 Sump # 87 Sump # 87 SYP Sump # 91 Sump # Vent Box Sump Diameter: 42 in 42 in 42 in Sump Depth: 36 in 33 in 31 in 24 in Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 15 in 17 in 14 in 18 in Height from Tank Top to Lowest Electrical Penetration: 13 in 14 in 11 in 12 in Condition of sump prior to testing: Dry Dry Dry Dry Portion of Sump Tested' 2" above prod. piping 2" above prod. piping 2" above prod. piping 2" above prod. piping Does turbine shut down when sump sensor detects liquid (both product and water)?' ❑Yes ❑No ®NA ❑Yes [:]No ®NA ❑Yes [:]No ®NA ❑Yes ❑No ❑NA Turbine shutdown response time * See comments See comments See comments See comments Is system programmed for fail-safe [:]Yesshutdown? Yes [:]No ®NA ❑Yes [:]No ®NA ❑Yes ❑No ®NA ❑Yes ❑No ®NA Was fail-safe verified to be operational? Yes No ®NA ❑ ❑ ❑ Yes ❑No ®NA ❑Yes ❑No ®NA ❑Yes ❑No ®NA Wait time between applying pressure/vacuum/water and starting test: 5 min 5 min 5 min 5 min Test Start Time: 10:50 AM 10:35 AM 10:25 AM 10:00 AM InitialReading (R,): 0 0 0 0 Test End Time: 11:20 AM 11:05 AM 10:55 AM 10:30 AM Final Reading (RF): 0 0 0 0 Test Duration: 30 min 30 min 30 min 30 min Change in Reading (RF -R,): 0 0 0 0 Pass/Fail Threshold or Criteria: 0.0025 0.0025 0.0025 0.0025 Test Result: ® Pass ❑ Fail ® Pass ❑ Fail ® Pass ❑ Fail ® Pass ❑ Fail' Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? ®yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No RNA ®Yes ❑No ❑NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) " Sump(s) sensor(s) were tested separately as part of the annual monitor certification test. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -I60)