Laserfiche WebLink
Name of ATGS CEI 3& Tank Level Module <br />,low <br />Version TLP2 (0.1 ggh Normal Test Mode) <br />Limitations on the- `- <br />The performance estimates above are only valid when: <br />• The method has not been substantially changed. <br />• The vendor's instructions for installing and operating the ATGS are followed. <br />• The tank contains a product identified on the method description form. <br />0 The tank is no larger than j -5,2M gallons. <br />• The tank is at least -50 percent full. <br />• The waiting time after adding any substantial amount of product to the tank is g hr, <br />4-Q_min hours. <br />• The temperature of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />0 The total data collection time for the test is at least -O-.M hours. <br />0 Other limitations specified by the vendor or determined during testing: -- -- <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />Hmlcati—on of ..... <br />M <br />I certify that the ATGS was installed and operated according to the vendor's instructions <br />and that the results presented on this form are those obtained during the evaluation. I <br />also certify that the evaluation was performed according to one of the following: <br />0 standard EPA test procedure for ATGS <br />13 alternative EPA test procedure for ATGS <br />G. Joe Hennon/J. D. Flora Midwest Research Ingtitule <br />(printed name) (organization performing evaluation) <br />425 Volker Blvd., Kansas City, MO 64110 <br />Nnature) f (city, state, zip) <br />May 21, 1222--_ <br />(date) <br />ATGS - Results Form <br />IMP REMING Mis <br />(phone number) <br />