Laserfiche WebLink
SWRCB,January 2002 �\ Page of <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: ❑ Sump Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: ❑Pressure C Vacuum ❑ Hydrostatic <br /> ❑Other(Sped) <br /> Test Equipment Used: Equipment Resolution: <br /> ONAREEM WON= <br /> Sump# Sump# Sump# Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Sump Material: <br /> Height from Tank Top to Top of - <br /> -Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to testing: <br /> Portion of Sump Tested' <br /> Does turbine shut down when <br /> sump sensor detects liquid(both ❑Yes ❑No ❑NA ❑Yes C No ❑NA ❑Yes ❑No ❑NA ❑Yes C No ❑NA <br /> product and water)?" <br /> Turbine shutdown response time <br /> Is system programmed for fail-safe ❑Yes ❑No ❑NA ❑Yes []No CNA C Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> shutdown?` <br /> Was fail-safe verifred to be ❑Yes ❑No ❑NA <br /> operational?* C Yes ❑No [INA 11Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Wait time between applying <br /> Pressure/vacuum/water and starting <br /> test: <br /> Test Start Time: <br /> Initial Reading(R,): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-&): <br /> Pas ail Threshold or Criteria: <br /> Test Result: ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fait ❑ Pass ❑Fail <br /> Was sensor removed for testing? ❑Yes ❑No C NA ❑Yes ❑No C NA CYes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Was sensor properly replaced and <br /> verified functional after testis ? ❑Yes ❑No C NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Comments—(include information on repairs made prior to testing and recommended follow-up for failed tests) <br /> 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an <br /> asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160) r, <br /> -- - - t <br />