Laserfiche WebLink
File MH28727 Vol. 0 Sec. I ILL-1 Qued: 2004-01-05 <br /> And Report Revised: 2006-10-04 <br /> STEP Drill a hole In the sump wall large enough for the pipe <br /> to pass through. <br /> STEP 2 Using one d the poly rings as a guide,mark and drffl <br /> the boll hole pattern in the sump with a%"drill bit. X <br /> STEP3 Apply a liberal bead of sealant to the bottom of both <br /> the interior and exterior gasket. This ensures a seal <br /> around all the boll holes. <br /> STEP4 Align both interior and exterior poly rings with the q N a <br /> gaskets and Instal)bolts and nuts. 8—i <br /> STEP 5 Working in a star pattern,tight"all nuts to 45 Inch <br /> lbs or until snug. <br /> STEP 6 Instal] Interior and exterior boots onto Interior and <br /> exterior gasket rings. Tighten the large dimension <br /> clamp to 45 Inch lbs to secure the beat to the gasket <br /> ring. <br /> STEP 7 Install pipe to the desired position and tighten both <br /> clamps to 65 Inch lbs or until tight. <br /> -991 - P (366126T0765 F�x [83CJ310-3843 <br /> 6LUELINE TE-:CHNDLOGIES LLC - 265 Pdoll" yuha C,*t- CA05 <br /> C060438297 <br />