COMPLIANCE INFO_2008-2018 - Laserfiche WebLink

Home Browse Search

SECTION 11.2 FUEL PUMP AND DISPENSER INSTALLATION Drawings, and the Contractor shall check space allotment, foundations, and other like items to ascertain that there are no interferences. The Contractor shall notify the owners rep., regarding any discrepancies or installation difficulties disclosed. Additional costs incurred by the Contractor's failure to report such discrepancies shall be borne by the Contractor. B. Before placement of equipment, the Contractor shall check concrete embedded items and anchor bolts, and where severe misalignments occur, adjustment of such misahznments shall be subiect to the approval of the Engineer. C..-knv deviation from the Drawings and,'or Specifications shall be subject to prior wiitten approval of the Engineer. 3.0- NSTALLATION V The Contractor shall install equipment in strict accordance with the manufacturer's drawings, tolerances, instructions, and recommendations. B. `'hen necessary, services of manufacturer's representatives, engineers, or installers will be made available for installing mechanical equipment. Such services shall be requested by the Contractor sufficiently in advance to allow ample time for approval and procurement. Additional costs incurred by the Contractor's failure to properly schedule such services shall be bome by the Contractor. C. The Contractor shall position the equipment, shim to level, properly align components, and tighten anchors. Prior to assembling equipment components or connecting external piping, ducts, and other like items, the Contractor shall thoroughly inspect the equipment internally_ for damage or defects, remove foreign materials, and clean piping assemblies. D. After completing external connections to piping and other like items, the Contractor shall ensure that equipment alignment is within the stated tolerances and that stresses from external connections do not exceed equipment manufacturer's limits. E. The Contractor shall lubricate all equipment in accordance with the manufacturer's instructions and in keeping with accepted engineering practice. The Contractor shall flush clean all equipment components requiring lubricant, but shipped "dry. The Contractor shall completely flush oil supply and return piping, drain the flushings, clean the oil reservoirs, add the specified lubricant, and purge the supply piping prior to connecting to the equipment. F. The Contractor shall be responsible for subsystem assemblage to equipment requiring field assembly. 709s1124 4 of 5