COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

1 0 e RECEIVED D. Results of Testing/Servicing z 014 Software Version Installed: 120.00 ENVIRONMENTAL Complete the following checklist: F Yes F No* Is the audible alarm operational? F Yes F No* Is the visual alarm operational? � _.__.._._._ _....._ _.:_ _.... . v......_. Yes No* Were all sensors visually inspected, functionally tested, and confirmed operational? ......... � Yes � No * I Were all sensors installed at lowest point of secondary containment and positioned so that P Y p at other equipment will not interfere with their roDer o ration? Yes No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) N/A operational? 1 F Yes F No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary N/A containment monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate positive shut-down? (Check all that apply) 1 Sump/Trench Sensors; F Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? Yes; No. F Yes F No* For tank systems that utilize the monitoring system as the primary tank overfill waming device (i. e. no mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the N/A tank fill point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? i _ % _._..._..* F Yes � F No Was an monitoring e�u��mentre_~w...�w._.�...v�._.,__._..._ Y g q p placed? If yes, identify specific sensors, probes, or other equipment —.__r replaced and list the manufacturer name and model for all replacement parts in Section E, below. Yes*___ . . No:m w : Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) r Product, F Water. If yes, describe causes in Section E, below. � Yes_ .. No* as monitoring sY_ stem set-up reviewed to ensure proper settings? Attach set up reports, if applicable �'—' Yes No* Is all monitoring equipment operational per manufacturer's specifications? *In Section E below, describe how and when these deficiencies were or will be corrected E. Comments: Other sensors from page one: L3 Vent Sump 794380-208/ 515989: Certified. L4 Transition Sump 794380-208/ 514107: Certified. The drop tube is equipped with a mechanical overfill prevention valve.