ARCHIVED REPORTS_2006_13 - Laserfiche WebLink

Home Browse Search

needed. If the ash or cement kiln dust is such that it can be placed without creating voids or causing material to be tracked off the working face area, it is spread and compacted evenly over the active face in a minimum 6-inch lift and average compacted lift thickness of less than 12-inches using a dozer. If the ash or cement kiln dust has larger particles that can not be placed without creating voids, the material will be blended with soil such that no voids are left exposed and the ash or cement kiln dust will not be tracked off the working face area. In addition, the ash and cement kiln dust is utilized in a manner to minimize the creation of dust by spraying with water trucks and, when feasible, stockpiling and placing material in locations that are protected from the wind. Compostable Materials (off-spec, delivered by generator): Compost materials are delivered directly to the working face and stockpiled to the side. If more material comes in than is required for the day, the material is stockpiled within the waste management unit and used, as needed. The compost material is spread evenly over the active face in a minimum compacted thickness of six inches and an average compacted thickness no greater than 12 inches using a dozer. Processed and Treated Auto Shredder Residue (TASK): TASR, that has been processed and treated in accordance with 22 CCR Section 66268.106(a)(1), is delivered directly to the working face and stockpiled to the side. If more material comes in than is required for the day, the material is stockpiled within the waste management unit and used, as needed. The TASR is evenly spread and compacted over the active face in a minimum 6-inch lift and average compacted thickness of less than 24-inches using a dozer. If major precipitation events are anticipated within several days, Forward will cease using TASR until the threat of precipitation is over in compliance with condition "r" of the SWFP. Construction and Demolition Wastes: C&D is delivered directly to the working face and stockpiled to the side. If more material comes in than is required for the day, the material is stockpiled within the waste management unit and used, as needed. Processed C&D waste materials will be ground, pulverized, shredded, screened, source separated, or otherwise processed alone or mixed with soil in a manner to provide a compacted material free of open voids when applied to meet the performance requirements as alternate daily cover. Processed C&D Forward Landfill JTD 6-11 J:\Allied\Forward\ITD Amendment\March 2006 JTD-LEA Resp\ITDVTD Sec 6 Rev.doc: 5/22/02;Rev. 1:7/2002:Rev.2:4/2003;Rev 3:6/2003;Amendment No.1:5/22/2006