Laserfiche WebLink
® • Verify that equipment used to unload the rolls will not damage the geotextile. <br /> • Verify that rolls are wrapped in impermeable and opaque protective covers. <br /> • Verify that care is used to unload the rolls. <br /> • Verify that all documentation required by the Specifications has been received. <br /> • Verify that each roll is marked or tagged with the following information:manufacturer's <br /> name; project identification; lot number; roll number; roll dimensions. Log this <br /> information on the goosynthetic receipt form. <br /> • Verify that the geosynthetic receipt form is completed. <br /> • Verify that materials are stored in a location that will protect the rolls from ultraviolet <br /> light exposure,precipitation,mud,dirt,dust,puncture,cutting,or any other damaging or <br /> deleterious conditions. <br /> Any damaged rolls may be rejected. Verify that rejected material is removed from the site or stored <br /> at a location separate from accepted rolls. Geotextile rolls that do not have proper manufacturer's <br /> documentation must also be stored at a separate location,until all documentation has been received <br /> and approved. <br /> 4.3.2 Acceptance Testing <br /> Tests. The QA/QC Consultant will ensure that samples are removed and forwarded to the <br /> Geosynthetic CQA Laboratory for testing at a frequency of one sample per lot or one per 100,000 sq. <br /> ft., whichever is more stringent, to ensure conformance to both the Specifications and the <br /> Manufacturers list of guaranteed properties. The material will be sampled at the site by the QA/QC <br /> Inspectors or at the manufacturing plant by an independent third parry under the direction of the <br /> QA/QC Consultant. <br /> As a minimum,the following shall be established for each type of geotextile: <br /> • Weight per ASTM D5261; <br /> • Grab Tensile Strength per ASTM D4632 <br /> Direct Shear Testing (ASTM D5321). The QA/QC Consultant shall perform a direct shear test <br /> (minimum one test per project or material type)between the project specific Geotextile and textured <br /> geomembrane per ASTM D5321 and as described in the Specifications. <br /> Page 37 <br />