Laserfiche WebLink
TOOLS <br /> A. <br /> 1. All tools and equipment shall be maintained in good condition. <br /> 2 . Damaged tools or equipment shall be removed from service and <br /> tagged "DEFECTIVE. " <br /> 3 . Pipe or Stillson wrenches shall not be used as a substitute <br /> for other wrenches. <br /> 4. Only appropriate tools shall be used for the job. <br /> 5. Wrenches shall not be altered by the addition of handle- <br /> extensions or "cheaters. " <br /> 6. Files shall be equipped with handles and not used to punch or <br /> pry- <br /> 7. - A screwdriver shall not be used as a chisel . <br /> 8. Portable electric tools shall not be lifted or lowered by <br /> means of the power cord. Ropes shall be used. <br /> 9. Electric cords shall not be exposed to damage from vehicles. <br /> 10. In locations where the use of a portable power tool is <br /> difficult, the tool shall be supported by means of a rope or <br /> similar support of adequate strength. <br /> - 11. Tools must be kept clean and in good repair. <br /> 12 . Only trained or experienced employees may operate tools, <br /> machines, or equipment. <br /> 13 . Control Switches (Powered hand Tools) . The following tools <br /> must be equipped with a constant contact ' on-off ' switch: <br /> * Drills <br /> * Tappers <br /> * Fastener Drivers <br /> * Grinders <br /> * Disc and Belt Sanders <br /> * Reciprocating and Saber Saws <br /> * Tools similar to those above <br /> Circular Saws <br /> Chain Saws (electric, hydraulic, and pneumatic) <br /> * An additional single motion lock-on control is also <br /> permitted. <br /> 5 - <br />