Laserfiche WebLink
InstalIatio Guide: AdvanTexm-AX 4eatment Systems <br /> s:,W <br /> :r <br /> Step 3 - - <br /> ::� <br /> Placing Processing Tank and AdvanTex Filter <br /> F ly. <br /> Step 3A: Placing Processing Tank .h <br /> Follow the tank manufacturer's guidelines for setting the ;I <br /> tank. <br /> NOTE: For modes IB and 3B, the discharge pump basin "A <br /> can often be placed in the tank excavation. Placing processing tank and discharge pump <br /> basin into excavation. <br /> Step 313: Preparing Top of Tank for AdvanTex Filter <br />` <br /> 11i'the AdvanTex Filter is placed over the top of the tank, a <br /> minimum 5" thick layer of compacted soil or sand must be <br /> placed on top of the tank in order to get the required slope <br /> on the Filtrate Return Line. <br /> Step 3C: Setting AdvanTex Filter into Place <br /> The AXIO is light enough to set in place by two people in <br /> many cases. If not, lift and set the filterpod into place by <br /> F slinging two wide truck straps under the entire unit. Using a F <br /> ' backhoe, lift and set the filter. <br /> Setting AdvanTex AXIO filter into place <br /> Step 3D: installing Anti-Flotation Flanges <br /> The pod comes with pre-drilled fiberglass tabs on the bot- <br /> tom corners. If seasonal high groundwater is expected to x <br /> be more than 6" above the bottom of the AdvanTex Filter ' ' <br /> you can pour concrete on the tabs or you can order a set of <br /> anti-flotation flanges. For the processing tank, consult the ' <br /> tank manufacturer for proper anti-flotation measures. <br /> f' <br /> Detail of anti-flotation flange installed <br /> EIM-ATX-AX-1 ©2001 Orenco Systems- Inc. <br /> Rev 1.48101 Information subject to change without notice <br />