Laserfiche WebLink
f. Install the new down spout tube to the opposite i. Remove the manifold blanking plate from the <br /> side of the unit from the previous tube. See lower air gap plate by removing (2) screws. <br /> Picture 007. See Picture 011. <br /> 4 <br /> Picture 007 Picture 011 <br /> g. Open the Bezel door on "B " side of the unit. j. Place the Healy mounting plate in place on top <br /> See Picture 008. of the lower air gap plate. See Picture 012. <br /> t <br /> Picture 008 Picture 012 <br /> h. Remove the manifold blanking plate from k. Pre-tap the (4) holes in the top of the Healy <br /> the bottom of the cd module by removing (2) mounting brackets. Can use the 8 mm self <br /> screws. See Picture 009. tapping screws that are used to mount the <br /> Healy assy. to tap holes. See Picture 013. <br /> Picture 009 <br /> Picture 013 <br /> 8-25 <br /> CARO Approved IOM 8-Gilbarco Encore 300 E 500 Series-Executive Orders VR-201 and VR-202 <br />