Laserfiche WebLink
4 <br /> I + <br /> �1 <br /> Photo G Photo H <br /> • <br /> _ r <br /> Photo I Photo J <br /> ❑ Remove the 3/8" NPT x 3/8" flare straight fitting from the inlet of the VAC pump on the "B" <br /> side and install the 3/8" pipe plug supplied in the Healy Vapor Kit, tighten securely, see <br /> photo I. <br /> ❑ On the "A" side VAC pump, back off the electrical nut from the elbow attached to the pump <br /> and the flare nut holding the vapor tube in the out port of the pump, see photo J. <br /> ❑ Remove the (3) sheet metal screws that hold the pump to the bracket. <br /> ❑ Remove the electronics cover, secured with (4) bolts, from the pump. <br /> ❑ Disconnect harness wires from the pump wires and pull through the elbow. Let the <br /> electrical tube hang for future use. Remove the elbow and set aside for future use. <br /> ❑ Lift the VAC pump off the outlet vapor tube and set aside. <br /> ❑ Remove the VAC pump mounting bracket. <br /> ❑ Unscrew the flare nut holding the outlet vapor tube in the bottom of the dispenser and <br /> remove the vapor tubing, see photo F, right side when facing the dispenser. <br /> 8-7 <br /> CARO Approved IDM 8-Wayne Harmony Series(Assist)-Executive Orders VR-201 and VR-202 <br />